The Ansimag product line is simple by design. All wetted parts are non-metallic to safely handle a generous range of corrosives and solvents up to 250°F (121°C) without corrosion. Handling process fluids including Hydrofluoric Acid, Sulfuric Acid, Nitric Acid, Hydrochloric Acid, Sodium Hypochlorite, Sodium Hydroxide, Ferric Chloride…etc.

An innovative rear casing generates no eddy currents thus eliminating heat generation and reducing energy costs. Ansimag pumps are magnetically driven and sealless, there are no leaks, no emissions, no costly seal maintenance - no problems.

Motor : 25 HP to 100 HP (18.7 KW to 74.6 KW)
Temp Range : -20℉ to 250℉ (-29℃to 121℃)
Design Pressure : 350 PSI（24.1 BAR）
Mounting : Closed coupled with NEMA standard C-face motor and long coupled with horizontal motor
Casing : ETFE lined ductile iron (ANSI flange #150/300)
Impeller : Carbon fiber filled ETFE (closed type)
Shaft Bushing : Silicon carbide
Performance Curve :

Motor : 1.5 HP to 30 HP (1.12 KW to 22.38 KW)
Temp Range : -20℉ to 250℉ (-29℃ to 121℃)
Design Pressure : 285 PSI (19.7 BAR)
Mounting : Closed coupled with NEMA standard C-face motor and long coupled with horizontal motor
Casing : ETFE lined ductile iron (ANSI flange #150)
Impeller : Carbon fiber filled ETFE (closed type)
Shaft Bushing : Silicon carbide or carbon graphite
Performance Curve :

KM1515, KM2156:

Motor : 0.5 HP to 7.5 HP (0.37 KW to 5.6 KW)
Temp Range : -20℉ to 250℉ (-29℃ to 121℃)
Design Pressure : 150 PSI (10.34 BAR)
Mounting : Closed coupled with NEMA standard C-face motor
Casing : ETFE lined ductile iron (ANSI flange #150)
Impeller : Carbon fiber filled ETFE (closed type)
Shaft Bushing : Silicon carbide or carbon graphite
* Teflon/PFA wet end model is available
Performance Curve :

New Design

KM1516LF (low flow, non-metallic, sealless magnetic drive pump):

Heads Range: 10 ft to 170 ft (3 m to 52 m)
Flows Range: 1 gpm to 40 gpm (0.23 m3/hr to 9 m3/hr)
Temp Range: -20 to 250°F (-29℃ to 121℃)
Motor: 1HP to 7.5 HP（1 KW to 5.5 KW）
Design Pressure: 150 PSI ( 10.34 BAR)
Mounting: Closed coupled with NEMA standard C-face motor
Casing: ETFE lined ductile iron
Bearing Materials: Silicon Carbide(Standard), or Carbon Graphite(Optional)
Max Viscosity: 700 SSU (150 centistokes)
Solids Range: Concentration to 2% w/w

Performance Curve:

Motor : 1.5 HP to 30 HP (1.12 KW至22.38 KW)
Temp Range : -20℉ to 250℉ (-29℃ to 121℃)
Design Pressure : 325 PSI (22.41 BAR)
Mounting : Closed coupled with NEMA standard C-face motor
Casing : ETFE lined ductile iron (ANSI flange #150/300)
Impeller : Carbon fiber filled ETFE (closed type)
Shaft Bushing : Silicon carbide
Performance Curve :

Motor : 1.5 HP to 30 HP (1.12 KW to 22.38 KW）
Temp Range : -20℉ to 250℉ (-29℃ to 121℃)
Design Pressure : 285 PSI (19.65 BAR)
Mounting : Closed coupled with NEMA standard C-face motor and long coupled with horizontal motor
Casing : ETFE lined ductile iron (ANSI flange #150)
Impeller : Carbon fiber filled ETFE (closed type)
Shaft Bushing : Carbon graphite (silicon carbide is available)
Maximum Priming Lift : 20 feet (6.1 m)
Performance Curve :